Performance Specifications

Measurement Range

-60 to +20 °C dew point

Accuracy

±2 °C dew point

Response Time

T95 to -60 °C dew point in <3 minutes

Repeatability

0.5 °C dew point

Calibration

9-point calibration certificate traceable to national standards

Electrical Specifications

Output Signal

User configurable over range; 4–20 mA (2-wire connection, current source)

Moisture Display/Output

Dew point

Power Supply

Rechargable NiMH battery pack with 16-hour life from full charge

Battery Charger

Universal battery charger included

Electrical Safety

EN61010-1

Operating Specifications

Operating Temperature

-20 to +50°C

Compensated Temperature Range

-20°C to +50°C

Storage Temperature

-20°C to +60°C

Maximum Operating Pressure

Low-pressure version (LP): 2 MPag (20 barg)
High-pressure version (HP): 10 MPag (100 barg)

Recommended Flow Rate

1 to 5 Nl/min

Sampling System Configuration

Pressurized or atmospheric

Mechanical Specifications

Ingress Protection

NEMA Type 6*

Display Type

Flush mounted 3.5 digit red LED

Carry Case

Yellow Peli propylene case with internal storage of charger, sample tube accessories and output connector

Weight

4kg

Sample Block

Stainless steel, fully self-contained sample system with fixed orifice ports for flow control/pressure or atmospheric measurement and built-in filtration using a standard drop-in cartridge

Filter Cartridge

Removes 99.5% of particles ≥0.3μm supplied with cartridge installed. Spare cartridges are available

Sample Connections

Optional: Legris pneumatic fittings
6mm Swagelok® tube fittings
1/4” Swagelok® tube fittings

Sample tubing

Low-pressure version (LP): 2m of 6mm O/D PTFE supplied
High-pressure version (HP): Metering valve and port adaptor